BENTLY 330130-080-12-05 APM Modem Card

Product Detailed Description:

Bently Nevada Digital Output Termination modules are essential components within digital vibration monitoring systems (like the 3300 series or newer systems). Their primary function is to receive digital signals from the system’s signal conditioning modules (SCMs) or processor modules, process these signals based on configured logic, and then output discrete digital signals. These outputs are typically used to drive external devices such as alarm relays, PLC inputs, or other digital control systems. The modules provide the interface between the digital monitoring system and the plant’s control or alert infrastructure. They often feature configurable logic (e.g., OR, AND, latched, non-latched) to allow flexible response to machine condition thresholds.

Product Parameters:

• Output Type: Typically Dry Contact (Form C relay contacts: Normally Open, Normally Closed, Common) or Solid State outputs (Open Collector or Totem Pole).

• Number of Outputs: Varies by module (e.g., 4, 8, or 16 outputs per module).

• Output Configuration: Often configurable per channel (e.g., selectable between different logic types or contact arrangements).

• Relay Specifications (if applicable):

• Contact Rating: Typically 240 VAC / 30 VDC, 2 A resistive load.

• Coil Voltage: Often 24 VDC.

• Solid State Output Specifications (if applicable):

• Voltage Range: Typically 5-30 VDC.

• Current Rating: Often 50-100 mA per output.

• Power Requirements: Typically 24 VDC, derived from the system power supply.

• Communication Interface: Operates within the system’s digital bus architecture (e.g., 4-wire loop, CAN bus, or other proprietary bus depending on the system generation).

• Environmental Rating: Designed for industrial environments, often rated for operating temperatures (e.g., -20°C to +60°C), humidity, and vibration.

Product Advantages:

• Digital Integration: Provides seamless digital communication between the vibration monitoring system and plant control systems (DCS, PLC).

• Configurable Logic: Allows users to tailor the alarm or trip logic (e.g., OR’ing multiple inputs, latching alarms) without additional external hardware.

• Improved Reliability: Solid-state outputs can offer longer life and faster response times compared to mechanical relays. Relay outputs provide robust dry contacts suitable for various loads.

• System Scalability: Enables the monitoring system to easily interface with existing plant infrastructure without complex modifications.

• Reduced Wiring: Consolidates multiple digital outputs onto a single module, potentially simplifying wiring compared to individual point solutions.

• Centralized Monitoring: Alarms and status are managed within the integrated monitoring system, providing a unified view of machine health.

Precautions / Notes:

• Correct Wiring: Ensure proper connection of output terminals to the load (e.g., relay contacts to the alarm device) and correct polarity for solid-state outputs. Incorrect wiring can damage the module or connected devices.

• Load Matching: Do not exceed the specified voltage and current ratings for the outputs. For relay outputs, ensure the load type (resistive, inductive) and power are within limits. For solid-state outputs, ensure the load impedance is appropriate.

• Configuration: Outputs must be correctly configured within the system software (e.g., for logic type, setpoints, latching behavior) to function as intended. Verify configuration after installation or changes.

• Power Supply Stability: Ensure the system’s 24 VDC power supply is stable and within specifications to prevent erratic behavior or damage.

• Environmental Considerations: Install the module in an environment that meets its operating temperature, humidity, and vibration specifications. Protect from excessive dust or moisture.

• System Compatibility: Ensure the termination module is compatible with the specific Bently Nevada system (e.g., 3300/14, 3300/16, or newer) and other connected modules.

• Handling: Use proper ESD precautions when handling the module.

Product Applications:

• Machine Protection: Driving high-impact alarms or trip relays for critical machinery when preset vibration or other monitored parameters exceed safe limits.

• Process Control Integration: Sending digital status signals (e.g., “Machine OK,” “Vibration High”) to PLCs or DCSs to integrate machine health monitoring into overall plant control logic.

• Start/Stop Logic: Used in conjunction with other system components to implement complex start-up and shut-down sequences based on machine condition.

• Remote Annunciators: Activating lights or buzzers in control rooms or remote operator stations to alert personnel to specific machine conditions.

• Interlocking: Providing digital inputs to other equipment (e.g., closing a valve, isolating a pump) based on machine health status.

• Condition-Based Maintenance (CBM) Systems: Serving as digital interfaces for CBM platforms that require discrete alarm inputs.

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Related products:

E-mail: alex@fenoux.com

Tel.: +86 13338369201

Skype: +86  13338369201

WhatsApp: +86  13338369201