1. Product Description
The Rexroth MSK040C0600NNS1UP0 is a compact, modular servo drive unit, typically part of Bosch Rexroth’s IndraDrive series or a similar product line. It is designed for precise and dynamic control of servo motors in a wide range of industrial automation applications. This specific part number suggests it is a single-axis drive unit with a continuous current rating of 60 Amps and a nominal voltage of 400V AC (common for industrial drives). The “UP0” suffix often indicates specific configuration options or software versions, but the core function remains a high-performance servo drive.
It integrates power electronics, motion control, and often a motor in a compact, space-saving design, facilitating direct mounting on machine elements.
2. Product Parameters (Typical for this type/class)
Nominal Voltage: 400 V AC (±10% tolerance usually)
Continuous Current Rating: 60 A (at 40°C ambient temperature, derated at higher temperatures)
Peak Current: Typically higher than continuous current, e.g., 120 A for short durations
Power Stage Technology: IGBT (Insulated Gate Bipolar Transistor) based
Control Loop: High-bandwidth current, velocity, and position control loops
Communication Interface: Often includes Ethernet (e.g., Profinet, EtherNet/IP, EtherCAT) and sometimes fieldbus options like CANopen or DeviceNet
Feedback Interface: Supports various encoders (e.g., Incremental, Absolute, Sin/Cos) via dedicated interfaces
Control Modes: Position control, velocity control, torque control
Dimensions: Typically compact, specific dimensions vary slightly by model (e.g., Width x Depth x Height in mm)
Weight: Relatively lightweight for its performance class (e.g., 8-12 kg)
Cooling: Forced air cooling via integral fan
Environmental Rating: Designed for industrial environments (e.g., IP20 for the unit itself, IP65/67 for optional motor integration)
Software: Operates with Rexroth’s IndraWorks software suite for configuration and commissioning
(Note: These are typical parameters. The exact specifications for MSK040C0600NNS1UP0 must be verified against the official datasheet.)
3. Product Advantages
High Performance: Offers fast dynamic response, high torque density, and precise motion control suitable for demanding applications.
Compact Design: Saves significant installation space compared to traditional separate drive and motor solutions, often allowing direct mounting.
Modularity & Flexibility: Can be easily integrated into various machine designs and configured for different control tasks.
Robustness: Designed for reliable operation in harsh industrial environments.
Efficiency: Modern power electronics contribute to good energy efficiency.
Reduced Wiring: Integrated design can minimize cabling complexity.
Comprehensive Diagnostics: Often includes advanced diagnostic features for easier troubleshooting and maintenance.
Compatibility: Works seamlessly with other Bosch Rexroth components and software.
4. Precautions
Electrical Safety: This is a high-power device. Strict adherence to electrical safety procedures is mandatory during installation, wiring, and maintenance. Disconnect power and verify zero voltage before working on the unit or connected motor.
Proper Wiring: Ensure correct connection of power supply, motor, encoder, and communication cables according to the wiring diagram. Incorrect wiring can cause damage or safety hazards.
Environmental Conditions: Install the unit within the specified temperature, humidity, and altitude limits. Protect from dust, moisture, and corrosive substances.
Cooling: Ensure unobstructed airflow for the cooling fan to prevent overheating. Regularly check fan operation.
Software Configuration: Proper configuration using the correct software (e.g., IndraWorks) is crucial for correct operation. Incorrect settings can lead to malfunctions or damage.
Compliance: Ensure the installation and operation comply with all relevant local and international electrical codes and standards (e.g., IEC, UL).
Handling: Handle the unit carefully to avoid physical damage. Avoid dropping or subjecting it to excessive vibration during transport or installation.
Authorized Personnel: Only qualified and trained personnel should install, commission, operate, and maintain this equipment.
5. Product Applications
The Rexroth MSK040C0600NNS1UP0 is suitable for a wide range of applications requiring precise and dynamic motion control, including:
Machine Tools: CNC milling machines, lathes, grinding machines, robotics for material handling or welding.
Packaging Machinery: Forming, filling, sealing machines, labeling machines.
Material Handling: Conveyors, sorting systems, automated guided vehicles (AGVs), robotic palletizers.
Textile Machinery: Spinning, weaving, knitting machines.
Printing and Converting: Web handling, die-cutting, folding-gluing machines.
Woodworking Machinery: CNC routers, saws, sanding machines.
Robotics: Joint drives for industrial robots.
General Automation: Any application requiring accurate positioning, speed control, or torque regulation of an electric motor.
Shipping Port: Xiamen, China
