SCHNEIDER 59604 ControlNet

Product Detailed Description:

The Schneider Electric 59604 is a compact and reliable DIN rail-mounted DC power supply, commonly used in industrial automation and control systems. Its primary function is to convert standard AC mains voltage (typically 100-240 Vac) into a stable and regulated 24 Volts DC output. This DC power is essential for energizing various control components such as Programmable Logic Controllers (PLCs), sensors, actuators, relays, and other field devices within an automation panel or control system. It is designed for easy integration onto standard DIN rails, facilitating efficient installation and space-saving within control cabinets.

Product Parameters (Typical Values - Verify with Datasheet):

• Input Voltage: AC 100 - 240 V (±10% tolerance, check datasheet for exact range)

• Input Frequency: 50/60 Hz

• Output Voltage: DC 24 V (Regulated)

• Output Current: Often 2.5 A or 5 A (check specific model - 59604 often refers to a 2.5A version, but confirm)

• Power Rating: Typically 60 Watts (for 2.5A version) or 120 Watts (for 5A version)

• Efficiency: Varies by model, often around 80-85%

• Protection:

• Overload Protection (OCP)

• Short Circuit Protection (SCP)

• Over Temperature Protection (OTP)

• Reverse Polarity Protection

• Operating Temperature Range: Typically -25°C to +60°C (check datasheet for exact range)

• Storage Temperature Range: Typically -25°C to +70°C

• Mounting: DIN Rail (e.g., Top hat rail, 35mm wide)

• IP Rating: Usually IP20 (protection against solid objects > 12.5mm), not suitable for direct contact with fingers or splashing water.

• Dimensions: Varies slightly by model, typically around 88mm x 71mm x 105mm (W x H x D)

Product Advantages:

• Reliability: Designed for continuous operation in industrial environments.

• Compact Size: Saves valuable space in control cabinets.

• Easy Installation: Simple DIN rail mounting.

• Wide Input Voltage Range: Offers flexibility and robustness against voltage fluctuations in different regions or facilities.

• Built-in Protections: Safeguards connected devices against common electrical faults like overloads, short circuits, and reverse polarity.

• Stable Output: Provides a consistent 24V DC voltage essential for sensitive control electronics.

• Brand Reputation: Backed by Schneider Electric’s experience and support network.

Precautions / Important Notes:

• Electrical Safety: Always disconnect the power supply from the mains AC supply before performing any installation, wiring, or maintenance. Use appropriate personal protective equipment (PPE).

• Correct Wiring: Ensure correct connection of AC input (L/N) and DC output (+/-). Incorrect wiring can damage the power supply and connected equipment. Pay attention to the polarity of the DC output.

• Load Connection: Do not short-circuit the DC output terminals. Ensure the total connected load does not exceed the rated output current.

• Operating Environment: Install the power supply in a clean, dry environment. Avoid exposure to corrosive gases, excessive dust, or direct water splashing (IP20 rating). Ensure adequate ventilation to prevent overheating.

• Compliance: Ensure the power supply meets the relevant safety and EMC standards for your specific application and region (e.g., CE marking).

• Consult Documentation: Always refer to the specific product datasheet and installation manual for detailed instructions, warnings, and specifications.

Product Applications:

The Schneider Electric 59604 power supply is widely used in various industrial and commercial automation applications, including:

• Industrial Automation: Powering PLCs, sensors, valves, and actuators in machinery control panels.

• Building Automation: Supplying power to HVAC controls, lighting systems, access control, and security systems.

• Process Control: Used in control panels for water treatment, chemical processing, and food & beverage production.

• Material Handling: Powering controls for conveyors, sorting systems, and robotic workcells.

• Energy Management: Supporting control systems in power distribution and monitoring applications.

• Commercial Equipment: Used in control panels for vending machines, ticketing systems, and other automated commercial devices.

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Related products:

E-mail: alex@fenoux.com

Tel.: +86 13338369201

Skype: +86  13338369201

WhatsApp: +86  13338369201