Honeywell 05701-A-0284 Central control module

Honeywell 05701-A-0284 Overview

The Honeywell 05701-A-0284 is a Sensor Drive Module, specifically designed for catalytic gas sensors, and is a key component within Honeywell's System 57/5701 gas detection control systems. This module is responsible for interfacing with catalytic gas sensors, processing their signals, and sending data to the central control unit to monitor for combustible gases.

Product Detailed Description

• Function:

• Acts as an interface between a catalytic gas sensor (typically for combustible gases) and the main control system (e.g., System 57/5701).

• Provides power to the catalytic sensor.

• Processes the analog signal from the catalytic sensor, converting it into a usable format for the control system.

• May include basic signal conditioning and linearization.

• Essential for accurate and reliable detection of combustible gases.

• Features:

• Designed for use with catalytic gas sensors.

• Integrates into the modular System 57/5701 control system.

• Robust construction suitable for industrial environments.

• Likely includes diagnostic capabilities for sensor health and fault detection.

• Single-channel operation, meaning it controls one catalytic sensor.

Product Parameters

Based on information related to the System 57/5701 and typical sensor drive modules:

• Sensor Type Compatibility: Catalytic (for combustible gases).

• System Compatibility: Honeywell Sieger System 57/5701 Gas Detection Controllers.

• Input from Sensor: Analog signal from catalytic bead.

• Output to Controller: Likely a conditioned analog signal (e.g., 4-20mA) or digital signal to the central control card.

• Operating Temperature: -40°C to 85°C [-40°F to 185°F] (General range for related components in the system).

• Storage Temperature: -40°C to 150°C [-40°F to 302°F] (General range for related components in the system).

• Ingress Protection: IP67, IP69K (General protection for compatible sensors, likely applies to the module's connection side as well).

• Mechanical Shock: 50 G half sine wave with 11 ms duration (General for related components).

• Vibration: 20 G from 10 Hz to 2000 Hz (General for related components).

• Typical Connection: Likely a dedicated multi-pin connector for the catalytic sensor.

• Specific electrical parameters (e.g., supply voltage to the module, specific output ranges) would be found in the detailed System 57/5701 manual or a specific datasheet for the 05701-A-0284 if available.

Product Advantages

• Reliable Gas Detection: Ensures accurate and consistent monitoring of combustible gas levels.

• System Integration: Seamlessly integrates with the robust and proven Honeywell System 57/5701 architecture.

• Industrial Durability: Designed to withstand challenging industrial environments, contributing to long-term reliability.

• Safety Compliance: As part of a gas detection system, it adheres to critical safety standards for hazardous area monitoring.

• Ease of Maintenance: Modular design often allows for easier replacement and troubleshooting within the System 57/5701.

Precautions

• Correct Sensor Pairing: Must be used with compatible catalytic gas sensors as specified by Honeywell.

• Proper Installation: Follow the detailed installation instructions in the Honeywell System 57/5701 manual for wiring, mounting, and environmental considerations.

• Calibration: Gas detection systems, including sensors and drive modules, require regular calibration to maintain accuracy and compliance with safety regulations.

• Environmental Conditions: Ensure the operating environment (temperature, humidity, presence of corrosive gases) is within the module's specified limits.

• Electrical Safety: Adhere to all electrical safety guidelines during installation, maintenance, and operation. Ensure proper grounding.

• Intrinsically Safe Considerations: If used in hazardous areas, ensure all components (sensor, module, wiring) comply with intrinsic safety or explosion-proof requirements.

Product Applications

The Honeywell 05701-A-0284, as part of the System 57/5701, is primarily used in fixed gas detection systems for monitoring combustible gases in various industrial settings, including:

• Oil and Gas: Refineries, offshore platforms, pipelines, drilling sites (detection of methane, propane, etc.).

• Chemical Plants: Monitoring for flammable gases and vapors.

• Petrochemical Facilities: Ensuring safety in areas with potential for explosive atmospheres.

• Power Generation: Gas turbine enclosures, fuel storage areas.

• Wastewater Treatment Plants: Monitoring for methane and other combustible gases.

• Industrial Manufacturing: Any facility where combustible gases might be present due to processes or storage.

• Commercial Buildings: Boiler rooms, utility tunnels where gas leaks could pose a risk.

Shipping Port:  China

Payment: Bank of Chicago, Bank of Singapore

Express cooperation: fedex, DHL, UPS and your express account

Service: Professional Sales provides 24 hours /7 days online service

Related products:

E-mail: alex@fenoux.com

Tel.: +86 13338369201

Skype: +86  13338369201

WhatsApp: +86  13338369201